Tetsu-to-Hagané

特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Preface

「高清浄度合金鋼溶製」特集号発刊に寄せて

Preface to the Special Issue “High Temperature Production of Clean Alloyed Steel”

三木貴博

Takahiro Miki

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.439
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.108.439
特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Regular Article

1573 KにおけるCaO-SiO₂-Cr₂O₃ 三元系の相平衡関係と成分活量

Phase Relationship and Activities of Components in CaO-SiO₂-Cr₂O₃ Ternary System at 1573 K

岩橋広大, 橋本修志, 山内遼平, 齋藤啓次郎, 長谷川将克

Kodai Iwahashi, Shuji Hashimoto, Ryohei Yamauchi, Keijiro Saito, Masakatsu Hasegawa

Keywords: phase diagram, activity, chromium oxide, special steel

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.440
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.TETSU-2021-070
特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Regular Article

還元雰囲気下1873 KにおけるCaO–SiO₂–Cr₂O₃ 系スラグへの酸化Cr の溶解度測定

Determination of Solubility of Chromium Oxide in the CaO–SiO₂–Cr₂O₃ Slag System at 1873 K under Moderately Reducing Conditions

李智, 加藤千聖, 小林能直

Zhi Li, Chisei Kato, Yoshinao Kobayashi

Keywords: stainless-steel refining, chromium oxide, slag, solubility, oxygen sensor

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.449
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.TETSU-2021-119
特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Regular Article

高清浄度クロム鋼溶製を目的とするスラグ制御のための溶存金属酸化物の化学状態分析

Chemical State Analysis of Metal Oxides for Slag Control on Smelting of High-Quality Chromium Steel

篠田弘造, 助永壮平

Kozo Shinoda, Sohei Sukenaga

Keywords: slag, oxide glass, valence ratio, X-ray absorption spectroscopy, XANES

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.455
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.TETSU-2021-113
特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Review

高クロム鋼中の介在物の生成と組成変化

Formation and Evolution of Inclusions in High Chromium Steel

樋口善彦, 小野英樹, 奥本括嘉

Yoshihiko Higuchi, Hideki Ono, Katsuyoshi Okumoto

Keywords: inclusion, slag, spinel inclusion, CaO-MgO-Al₂O₃ system, TiO_x- Al₂O₃-MgO system, stainless steel, deoxidation

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.460
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.TETSU-2021-121
特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Regular Article

溶融Fe-Cr-Ni 合金におけるAl 脱酸平衡の実験的測定と数値解析

Experimental Measurements and Numerical Analysis of Al Deoxidation Equilibrium of Molten Fe–Cr–Ni Alloy

深谷宏, 中嶋成佳, Jonah Gamutan, 鈴木茂, 梶川耕司, 斉藤研, 三木貴博

Hiroshi Fukaya, Seika Nakajima, Jonah Gamutan, Shigeru Suzuki, Koji Kajikawa, Ken Saito, Takahiro Miki

Keywords: quadratic formalism, thermodynamics, activity, excess free Gibbs energy, Redlich–Kister polynomial, aluminum deoxidation equilibrium, Fe-Cr-Ni alloy, sub-regular solution model: inclusion

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.469
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.TETSU-2021-111
特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Regular Article

1873 KにおけるFe-17 mass%Cr 鋼中MgO, MgO∙Al₂O₃ の生成条件および生成介在物の変化

Thermodynamic Conditions of MgO and MgO∙Al₂O₃ Formation and Variation of Inclusions Formed in Fe-17mass%Cr Steel at 1873 K

奥本括嘉, 加藤謙吾, 小野英樹, 樋口善彦

Katsuyoshi Okumoto, Kengo Kato, Hideki Ono, Yoshihiko Higuchi

Keywords: inclusion, slag, MgO inclusion, spinel inclusion, CaO-MgO-Al₂O₃ inclusion, alumina inclusion, stainless steel, deoxidation

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.479
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.TETSU-2021-120
特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Regular Article

ドロマイト耐火物からAl 脱酸溶鋼へのMgとCaの溶出挙動

Dissolution Behavior of Mg and Ca from Dolomite Refractory into Al-killed Molten Steel

任英, 劉春陽, 高旭, 張立峰, 植田滋, 北村信也

Ying Ren, Chunyang Liu, Xu Gao, Lifeng Zhang, Shigeru Ueda, Shin-ya Kitamura

Keywords: Mg dissolution, Ca dissolution, dolomite refractory, spinel, inclusion, Al-killed steel

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.491
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.TETSU-2021-114
特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Regular Article

1873 および1773 KにおけるFe-Mn-Al 融体とAl₂O₃，MnAl₂O₄ の脱酸平衡

Deoxidation Equilibria of Fe–Mn–Al Melt with Al₂O₃ or MnAl₂O₄ at 1873 and 1773 K

西垣亮介, 松浦宏行

Ryosuke Nishigaki, Hiroyuki Matsuura

Keywords: alumina, deoxidation, Fe–Mn melt, galaxite, thermodynamics

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.501
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.TETSU-2021-129
特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Regular Article

鋼の固液共存状態におけるSi-Mn 系脱酸介在物の形態と組成解析

Morphology and Composition of Inclusions in Si-Mn Deoxidized Steel at the Solid-liquid Equilibrium Temperature

Jonah Gamutan, 三木貴博, 長坂徹也

Jonah Gamutan, Takahiro Miki, Tetsuya Nagasaka

Keywords: Si-Mn deoxidation, complex inclusion formation, solid-liquid equilibrium temperature, microsegregation

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.509
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.TETSU-2020-103
特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Regular Article

Fe-Mn-Si-O-S 系合金の固液共存状態におけるMnO-SiO₂ 系介在物上のMnS 析出挙動

MnS Precipitation Behavior in MnO-SiO₂ inclusion in Fe-Mn-Si-O-S Alloy System at Solid-liquid Coexistence Temperature

Jonah Gamutan, 三木貴博, 長坂徹也

Jonah Gamutan, Takahiro Miki, Tetsuya Nagasaka

Keywords: MnS precipitation, acicular ferrite, solid-liquid coexistence temperature, microsegregation

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.517
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.TETSU-2021-074
特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Regular Article

1843 Kにおける溶融MnS-FeS およびCrS-FeS 相の熱力学的性質

Thermodynamics of Molten MnS-FeS and CrS-FeS System at 1843 K

Yan Lu, 三木貴博

Yan Lu, Takahiro Miki

Keywords: sulfide inclusion, activity, thermodynamics, phase equilibrium, regular solution model

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.525
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.TETSU-2021-115
特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Regular Article

1843 Kにおける溶融MnS-CrS-FeS 相の熱力学的性質

Thermodynamics of Molten MnS-CrS-FeS System at 1843 K

Yan Lu, 三木貴博

Yan Lu, Takahiro Miki

Keywords: sulfide inclusion, activity, thermodynamics, phase equilibrium, regular solution model

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.535
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.TETSU-2021-116
特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Regular Article

溶融Fe-Cr-Mn-S合金と平衡する固体・液体MnS-CrS-FeS 相の熱力学的性質

Thermodynamics of Solid and Liquid MnS-CrS-FeS Phase in Equilibrium with Molten Fe-Cr-Mn-S Alloy

Yan Lu, 三木貴博

Yan Lu, Takahiro Miki

Keywords: sulfide inclusion, activity, thermodynamics, phase equilibrium, regular solution model

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.541
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.TETSU-2021-117
特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Regular Article

SUS430Fステンレス鋼における偏晶型硫化物の生成に及ぼすMn 濃度，O 濃度の影響

Effect of Manganese and Oxygen Contents on Monotectic Sulfide Formation in SUS430F Stainless Steel

境沢勇人, 金子農, 江原靖弘, 福元成雄

Yuto Sakaizawa, Shigeru Kaneko, Yasuhiro Ehara, Shigeo Fukumoto

Keywords: ferritic stainless steel, sulfide, morphology, monotectic, eutectic, solidification, nucleation

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.552
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.TETSU-2021-112
特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Regular Article

非金属介在物- 溶融Feおよび溶融Fe-18%Cr-9%Ni 合金間の界面エネルギー評価

Evaluation of Interfacial Energy between Molten Fe and Fe-18%Cr-9%Ni Alloy and Non-Metallic Inclusion-Type Oxides

古川友貴, 齊藤敬高, 中島邦彦

Tomoki Furukawa, Noritaka Saito, Kunihiko Nakashima

Keywords: wettability, interfacial energy, contact angle, non-metallic inclusion, sessile drop method

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.560
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.TETSU-2021-107
特集号「高清浄度合金鋼溶製」
Special Issue on “High Temperature Production of Clean Alloyed Steel”

Regular Article

SiO₂ 活量の異なる酸化物基板の溶鋼に対する濡れ性

Wettability of Molten Fe-Al Alloys Against Oxide Substrates with Various SiO₂ Activity

古川友貴, 張子瑶, 廣角太朗, 齊藤敬高, 中島邦彦

Tomoki Furukawa, Ziyao Zhang, Taro Hirosumi, Noritaka Saito, Kunihiko Nakashima

Keywords: wettability, interfacial energy, interfacial tension, molten Fe, Fe-Al alloy, contact angle, sessile drop method

Tetsu-to-Hagané Vol.108 (2022), No.8, pp.572
Online released: July 31, 2022
DOI: https://doi.org/10.2355/tetsutohagane.TETSU-2021-110

BENEFITS TO AUTHORS

FULL OPEN ACCESS: This is a Full open access journal and indexed in DOAJ.

CC LICENSE: CC license will be granted.

TRANSLATION: English translation can be published in "ISIJ International" upon request.

PROGRESS: You can learn about the academic and technological progress of steel in Japan.

News

2022.08.03原稿募集案内: 「鉄と鋼」第110巻第6号特集号「多相融体の流動理解のためのスラグみえる化技術および研究の進展」原稿募集のご案内（投稿締切日：2023年9月30日）
2022.08.01Announcements: Change in the Procedure of Advanced Online Publication in the ISIJ Journals: August 2022
2022.07.31お知らせ: 「鉄と鋼」第108巻第8号の掲載記事を公開しました
2022.06.30お知らせ: 「鉄と鋼」第108巻第7号の掲載記事を公開しました
2022.06.10Announcements: “Tetsu-to-Hagané” Newly Indexed in DOAJ
2022.06.01Announcements: Change in the Procedure of Advanced Online Publication in the ISIJ Journals
2022.06.01Announcements: Announcement on the Association of ISIJ Journals with ORCID iD
2022.05.31お知らせ: 「鉄と鋼」第108巻第6号の掲載記事を公開しました
2022.04.30お知らせ: 「鉄と鋼」第108巻第5号の掲載記事を公開しました
2022.04.19原稿募集案内: 「鉄と鋼」第109巻第6号特集号「鉄鋼材料・製造プロセスにおけるデータサイエンス活用の新展開」原稿募集のご案内（投稿締切日：2022年10月1日）
2022.04.01お知らせ: 原稿の種類に「速報論文」が新設されました
2022.03.31お知らせ: 「鉄と鋼」第108巻第4号の掲載記事を公開しました
2022.03.03お知らせ再掲: 2021年掲載論文対象の論文賞候補論文の自薦について（投稿締切日：2022年3月14日）
2022.02.28お知らせ: 「鉄と鋼」第108巻第3号の掲載記事を公開しました
2022.02.25お知らせ: 「鉄と鋼」ジャーナルWebサイトを開設しました
2022.01.26原稿募集案内: 「鉄と鋼」第109巻第3号特集号「高温材料の高強度化に向けた基礎・基盤とその応用」原稿募集のご案内（投稿締切日：2022年7月1日）
2021.11.15原稿募集案内: 「鉄と鋼」第108巻第12号特集号「鉄鋼材料の摩擦接合技術」原稿募集のご案内（投稿締切日：2022年4月1日）
2021.09.30お知らせ: 2021年掲載論文対象の論文賞候補論文の自薦について
2020.05.11原稿募集案内: 「鉄と鋼」第108巻第8号特集号「高清浄度合金鋼溶製」原稿募集のご案内（投稿締切日：2021年11月30日）

Tweets by ssp_office